 |
NEWS |
|
|
CONTACT US |
|
 |
Add:
No. 1, Building 26, Donghai Smart Manufacturing City, Yuhuan, Zhejiang, China |
 |
Tel: +86-576-87566886
Fax: +86-576-87508382 |
 |
E-mail:
likychou@outlook.com |
|
|
 |
News Details |
 |
Four ways to repair the wrong way to destroy the car
|
|
Many owners have add to their car care, but don't know some of the car maintenance practices may even will damage to his car, then for their car we should how to correct maintenance, avoid car damage caused by some incorrect maintenance of way?
1. Don't like wheel bolt and nut oils in wheel repair, a few private owners in order to prevent rusting of the wheel bolts and nuts, installation ingenuity will bolt and nut are coated with lubricating oil, special wonder if this practice not only error and to traffic safety and bring some hidden dangers. After the bolt and nut are screwed down, each other has the characteristic of self locking. And coated with lubricating oil, the two between the self locking coefficient becomes small, the self locking performance is decreased. In the car at high speed, the bolt nut is easy to loose and even fall off, thereby causing traffic accidents.
2 do not wash the body with water inside the summer to the common private car owners who use water to wash the body, while wiping with a cloth, in this to remind the owner of the car is: the body inside the best not to wash directly with water. Because the cab floor pad below not Yimapingchuan, structure the driving room floor glue pad below the grooves and holes are very much. After flushing, the water is either deposited in the groove is not easy to dry, or from the through hole to flow to the transmission and other parts of the corrosion. In particular, the better sealing performance of the car can not be used directly to wash the body interior. The correct way is to use a wet cloth to wipe, but to avoid water.
3. Different brands of cooling liquid do not mix use who know engine cooling fluid should be added in time, but it's up to you whether you different brands of coolant temperature together using the?? if it is, you are advised to or as early as possible to drain the coolant, and re add the same brand of coolant. Because different brands of coolant to its chemical properties may vary disparities, such as to black metal and effective preservatives, but often of aluminum products have corrosive effects; and applicable to a preservative for aluminum alloy of iron alloy harmful. Because different brands of cooling liquid used in different preservatives, it can not be mixed use.
4. EFI car start don't step on the gas start engine before stepping on a few feet throttle is the habit of many drivers, especially in the winter cold start. But this method does not start the car for efi. Equipped with electronically controlled fuel injection device of engine and carburetor engine, the fuel injection control device can according to the temperature of the engine, load automatically adjust the amount of oil, start up the motor smoothly, i.e. when the car cold start, fuel injection control device can automatically increase the amount of oil. So, the EFI car engine is started, there is no need to step on the gas, not to step in before the start of a continuous emergency. Otherwise, but the engine start the bad. |
| |
| >> Return to the previous one |
|
