YUHUAN HANCHI MACHINERY CO.,LTD.
HOMEPRODUCTSSERVICEEQUIPMENTNEWSHUMAN RESOURCESABOUT USCONTACT US中文版
 
 
NEWS
 
Exhibition
 
Industry news
 
 
CONTACT US
 
Add:
No. 1, Building 26, Donghai Smart Manufacturing City, Yuhuan, Zhejiang, China
Tel: +86-576-87566886
Fax: +86-576-87508382
E-mail:
likychou@outlook.com
 
News Details
 
Methods of maintenance of common car failures

In the long run, there will be a few glitches, glitches, and a second-hand car. Especially tires, oil consumption, and braking systems are the most vulnerable to safety concerns. So how do you deal with this? What are the maintenance methods for common car failures? Let's take a look at this.

Common failure: the tyre is torn apart by a foreign object.

Tires are the easiest place to wear and break. Especially when go mountain roads will always be broken stones or nail pierced the tire of many car owners in order to save trouble, to the side of the road repair shop mending continued on his way, this method can only temporary remedy, plenty of safety when driving at high speed. Recommended later find within the professional repair shop to repair, because professional repair shop will have special remove the tire tool, and use special vulcanizing machine repair after heating will be more safe.

Common fault two: oil consumption increases greatly.

After a while, many car owners will find that the gas mileage has increased by more than 10 percent. In fact, the increase in fuel consumption also indicates a potential failure of the vehicle. This is the first step to understanding the causes of the increase in fuel consumption and then addressing them. There are many factors contributing to the increase in oil consumption. For example, the clutch sliding will cause the engine to lose the number of revolutions, causing the fuel to surge and replace the clutch plate and drive wheel in time.

Common failure: braking system fails.

Braking system failure includes: the brake pedal is too large, the brake function is slow, the brake efficiency is very low and even loss, the brake distance increases. There are three ways to eliminate the problem. Continuous on the brake pedal, such as pedal increased and elastic feeling, but after a pause when the pedal is still very low, is the brake system with air, then deal with exhaust braking system. One foot brake not spirit, but the brake effect is very good in successive steps, usually the brake pedal is too big or the brake clearance is too big. The pedals should be adjusted and the brake clearance should be made and the brake should be repaired when necessary. Recommended reading: how to determine if a tire should be replaced

For car appear all sorts of small fault, the owner must not be ignored, it is to remind you the vehicle contact failure, timely solve or replacement, not only can protect the safety of driving, also can prolong the service life of the vehicle. So, please pay attention.

 
>> Return to the previous one   
 
 
Copyright © YUHUAN HANCHI MACHINERY CO.,LTD. All right reserved. 浙ICP备14038620号
Support:CENST